Yongnuo YN468II I-TTL Speedlite for Nikon
Yongnuo YN468II i-TTL Speedlite is the successor to the YN-468 speedlite flash.
Now with STANDARD PC PORT
YN468-Ⅱprovides PC port，you can make the flash synchronously by connecting to the PC port.
There is improved design for battery compartment and button design
More solid and nice looking of the improved battery compartment, as well as better sensitivity and feeling control with new buttons.
Improved Optical Slave Sensor
This is not a new but improved feature where there is improvement of the range and sensitivity for the salve sensor.
Improved (Laser) AF Assist Light
It utilises laser beam instead of LED light as AF assist light.
1. TTL mode
The metering system of this camera will detect flash illumination reflected back from the object so as to automatically control flash output in this mode. In this E-TTL mode, you can also make compensation of flash brightness with the " Output contral knob" within the range of +/-3 ev, with the precision of 1/3 ev. ( The compensation value can be added to the compensation value set on the camera.)
2. Auto zoom
1) The flash speedlite will move forward and backward with the changes of lens focus to suit different illumination zones when it is mounted on the camera which supports E-TTL Function, the zoom range is 24mm - 85mm.
2) You also can set the focus position for the light head manually by pressing the mode switch button + Power button.
3. Multi Mode
It's the strobeflash mode, the flash light will output the power, flash frequency and time flash you have set.
4. M mode
You can set flash luminance as per your favorite, luminance level will be displayed by luminance indicator. When taking photos, you only require setting the flash luminance, adjust the camera and press the shutter, the flash light will flash under the camera synchronous signal.
5. S1 mode
It will work with the first work of the master flash synchronously in this mode, with the result consistent with the use of radio slave. ( When you use this mode, your master flash should be set at manual flash, the TTL flash system with pre-flash function and the red-reduction function with multiple flashes should not be used.)
6. S2 mode
It is very similar to S1 mode, but it can support the master flash in TTL mode. In particular, if S1 mode can not have correct and synchronous flash with the inbuilt flash, you can try to use S2 mode.
Guide Number” 33 at ISO 100
Circuit Design: IGBT
Zoom Range: 24,35,50,70,85mm
Vertical Rotation Angle: -7~90 degree
Horzontal Rotation Angel: 0~270 degree
Power Supply: 4X AA Batteries
Lighting Times: 100-1500 times with fresh batteries
Colore Temperature: 5600K
Flash Control: TTL auto flash / Manual level 8 light quantity output control with 0.3 stop increment
Additional features: FEB, FEC, FEL, Auto Zoom, Rear-curtain sync
1 x Yongnuo YN468II e-TTL Speedlite for Canon
1 x Velvet Pouch
1 x mini-Flash stand
1 x User Manuals (Chinese & English)
1 x Omnibounce diffuser (FOC)
Nikon D7000, D5000, D5100, D3000, D3100, D300, D300s, D200, D90, D80, D70s, D60, D40x, D40
6 months DSLRplaza standard warranty.
Read the review from flash expert here: http://speedlights.net/2011/10/28/yongnuo-yn-468ii-e-ttl-flash/
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: