Timer Remote Shutter Cord C3 for Canon EOS 1D, 5D, 7D, 10D, 20D, 30D, 40D, and 50D
This digital timer remote is designed to trigger a camera shutter with regular time intervals, featuring self-timer, interval timer, long-exposure timer, and exposure-count settings.
The timer can be set anywhere from 1 second to 99 hours, 59 minutes, 59 seconds. The buttons can be operated with a single thumb. The LCD panel can also be illuminated. The remote has a stylish and ergonomic design, making it a pleasure to use. It has a super large LCD screen. The shutter release button on the remote is a two-stage button: half-pressing the button will cause the camera to focus, and full-pressing will trigger the camera's shutter.
-Ideal for time-lapse photography including blooming flowers and astrophotography
-Remote switch with a 80cm cord
-Features self-timer, interval timer, long-exposure timer and exposure-count setting
-Simply insert the plug into the camera's remote control socket
-And you can easily enter the numeric settings with a single thumb
-LCD panel can also be illuminated
-Powered by 2 x AAA batteries(not included)
Delay / Self Timer (DELAY)
Just like the self timer on your camera. The TM timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 59 minutes and 59 seconds.
BULB/Long Exposure (LONG)
It allows you to take time exposures up to 100 hours in length.
Interval Timer (INTVL)
The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached.
Exposure Count (N)
This setting permits you to set the number of exposures that will be taken, up to a total 399.
- -Time delay: 0s to 99hrs 59 min 59s in one-second increments
- -Exposure time: 0s to 99hrs 59 min 59s in one-second increments
- -Internal: 1s to 99hrs 59 min 59s in one-second increments
- -Power source: Two AAA batteries(not included)
- -Color: black
- -Dimension: 155 x 40 x 18 mm
- -Weight: 90 g
EOS 50D/ 40D/ 30D/ 20D/ 10D/ 5D/ 5D Mark II/1Ds(Mark II,III), 1D(Mark II,III)
1 x Timer Remote Shutter Cord C3 for Canon EOS 1D, 5D, 7D, 10D, 20D, 30D, 40D, and 50D
1 x User Manual
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: